Sauder Costa 421934 Instrucciones De Montaje página 22

Step Step 17
NOTE: You will need someone's help in this step.
å
First, fi ll the holes in the LEGS (H and P) 1/4 to 1/2 full with GLUE (54M).
å
Then, insert eight WOOD DOWELS (15F) into the holes. Wipe away the
excess GLUE.
Next, fi ll eight holes in the TOP (S) 1/4 to 1/2 full with GLUE (54M).
å
NOTE: Use the exact holes shown.
å
Now, fasten the ENDS (A and B) and UPRIGHTS (D and E) to the TOP (S).
å
Tighten eight TWIST-LOCK® FASTENERS.
NOTE: Be sure the WOOD DOWELS in the LEGS insert into the TOP. Wipe
å
away the excess GLUE.
P
A
H
If you purchased the 420654 Hutch, fi nish
drilling through these four holes in the TOP
before fastening the ENDS and UPRIGHTS.
Page 22
NOTE: If you are attaching the 420654 Hutch, you need to fi nish
drilling four holes in the TOP (S) before completing this step.
H
D
P
This large hole
must be here.
P
E
H
S
Meet Part (S). This component has been
engineered to be lighter, stronger, faster...
well ok. Not technically faster. But
defi nitely makes for a sturdier Computer
Desk that' s easier to assemble and
friendlier to the environment.
421934
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
H
B
54M
P
15F
www.sauder.com/services
(8 used)