Important; Starting The Application - Beurer HT 55 Instrucciones De Uso

Important

• Untangle the mains cable [10] if it is twisted.
• Do not pull, twist or bend the mains cable [10] and do not pull or route it over/on sharp, point-
ed objects or hot surfaces.
• Do not trap the mains cable [10] in drawers, doors or between the heating rods [2], etc. Dam-
aged or tangled mains cables [10] increase the risk of electric shock!

6.1 Starting the application

1. Dry your hair thoroughly before using the curl styler.
2. Make sure that your hair is clean and free from
styling products. This does not apply to products
which protect the hair against heat.
3. Comb your hair to get rid of any tangles.
4. Insert the mains plug into a suitable socket. "OFF"
appears on the LCD temperature display [3]. Press
the ON/OFF button [6] to switch on the curl sty-
ler. The current set temperature appears on the
LCD temperature display [3]. The heat-up phase
is indicated by the temperature display flashing.
When the temperature display is continuously lit,
the curl styler has reached the set temperature
setting and can be used.
21