Chapter 2 - Safety And Disposal Procedures; Sensor Inspection - GENDEX GX S-700 Manual Del Usuario

Chapter
2
The device must be installed and used in accordance with the safety regulations and
instructions for use supplied in this User Manual, for the purposes and applications for which
it is intended.
All external surfaces of the sensor, sensor cable, sensor holders and the sensor sheaths are
considered to be applied parts and are safe for normal or accidental patient contact during use.
The GXS-700 has no serviceable parts and does not require to be calibrated. Do not open the
device to service it. All aspects of the GXS-700 that are meant to be attended to by the operator
are accessible without opening the internal components of the device. If there is a service
problem, contact a qualified dealer service representative or Gendex Technical Support.
Important:
Portable/mobile radio frequency communications equipment can affect the
function of the GXS-700 sensor as well as any other electronic medical
equipment.
GXS-700 is a USB compliant device and shall be used with USB compliant cables suitable for
high speed/USB 2.0 cables. Such cables are either marked "USB 2.0" or "USB Hi-Speed."
USB certified hubs can be used to extend the distance to the USB host/computer. The length
of the cable connection to the hub or between hubs shall not exceed 5m.
CAUTION
Using non-USB compliant cables or hubs, or exceeding the maximum count of
USB hub devices for extending the distance, can degrade the immunity of the
GXS-700 sensor to electromagnetic fields or increase the emission of
electromagnetic fields from the sensor.

Sensor Inspection

Always inspect the sensor, cable, and positioning devices for physical damage prior to every
use.
WARNING
Remove sensor from service if damage to the cable or housing is
observed, otherwise exposure to elevated surface temperature or
electrical energy may result.
English
Safety and Disposal
Procedures
2-1