Mounting The Sensor Cradle - GENDEX GX S-700 Manual Del Usuario

Gendex GXS-700
TM
7. From the GXS-700 GxPicture dialog box, select the "Image Setting" tab and select the
desired settings.
8. Close the installation by taking phantom images using the GXS-700 sensor (see
"Image Quality Assurance" on page 6-7).

Mounting the Sensor Cradle

Install the sensor cradle in a place that is convenient and does not exceed the maximum
length of the USB cable, which is 10 ft. (3 m). The sensor cradle should also be
positioned so that the cable from the sensor does not create a tripping hazard. To install
the sensor cradle, clean the mounting surface, remove the backing from the double
sided-tape, then firmly press the sensor cradle against the mounting surface.
4-2 English