Gendex GXS-700
TM
WARNING
Take the necessary steps to protect yourself from radiation. For proper
operator positioning, refer to the 'Instructions for Use' of your intraoral X-
ray equipment.
8.
Acquire the image by pressing the X-ray button on your radiography system.
Important:
9.
Carefully remove the sensor from the oral cavity following the exposure.
10. Grasp the sensor and positioning device and remove the sensor from under the
retaining clips.
11. If needed, grasp the USB connector and pull it straight out of the port on the
computer.
Portability
GXS-700 can be easily moved from one dental chair to another. Once disconnected from the
USB port of the computer, the sensor may be positioned near a second dental chair and
connected to a USB port present nearby.
The USB technology allows easy connection and disconnection of GXS-700 even if the
computer is switched on, unless the PC presents particular limitations. No activation or
deactivation procedure is necessary with GXS-700, just plug in and out.
Hygiene
CAUTION
After each patient, the sheath must be removed and the sensor must be
cleaned and disinfected by rubbing with isopropyl alcohol (70%); h olders
should be disinfected in an autoclave or with a cleaning agent after each
patient.
6-4
It is important that the X-ray beam hits the whole sensor surface.
English