Optional Accessories - Kreg Jig K4 Manual Del Propietário

Optional Accessories

10
Available from your Kreg dealer or online at kregtool.com
Micro-Pocket Drill Guide
™
With a hole diameter 25% smaller than our standard pocket hole,
the Micro-Pocket Drill Guide lets you create compact pocket
™
holes in small projects, thin stock, and tight repair applications.
Kreg Jig HD
®
Designed for use with 1½" (38mm)-thick and thicker framing material,
this heavy-duty system features #14 x 2½" (64mm) pocket screws.
Quick Change Kit
Switch from drilling pocket holes to driving pocket-hole screws in
seconds. The quick-change chuck installs in any three-jaw drill
chuck to accept standard ¼" (6mm) hex-shank bits.
Mini-Trak 48"
(1219 mm)
Enhance the utility of the workpiece support stop included with
the K4MS by mounting a piece of this T-track on both sides of
your bench-mounted jig. Anchoring the support stop to the T-track
allows for easy repositioning.
Kreg Clamps
Set the desired pressure and these clamps automatically adjust
to any material thickness up to 2 ⁄ " (73mm) for the 3" (76mm)-
7
8
reach clamp and 4½" (108mm) for the 6" (152mm)-reach clamp.
Kreg System Organizer
Keep your entire pocket-hole workshop in this compact, fitted case.
Accommodates K3, K4, or K5 pocket-hole jigs, face clamps, Micro,
HD, and plug cutter drill-guide blocks, drill and driver bits, and an
assortment of pocket screws.
www.kregtool.com