Tabla de contenido
Publicidad
ENGLISH
future reference. Keep the instructions for use for later reference. Note for adult supervisors: Check if
the toy is assembled as instructed. The assembly shall be performed under the supervision of an adult.
WARNING! Not suitable for children under 8 years old!
This product is not intended for use by children without supervision of a parent. Flying the helicopter requires
skill and children must be trained under the direct supervision of an adult. Before first use: Read the user's
information together with your child. Inappropriate use may result in severe injuries and/or damage to
property. It has to be operated with care and caution and requires both mechanical and mental skills. The
operating instructions contain notes on safety and technical regulations as well as information on maintaining
and operating the product. It is indispensable to read these instructions thoroughly before the first usage. Only
this helps to avoid accidents with injuries and damage.
For safe use, the room where the toy is used must be sufficiently large. Only use the helicopter in
closed rooms which provide sufficient space and follow all instructions given in this manual.
Hands, hair and loose clothing, including other objects such as pens and screwdrivers must be kept away
from the propeller (rotor). Do not touch the rotating rotor. Especially take care that your hands DO NOT get
close to the rotor blades!
CAUTION: Risk of eye injuries. Do not fly near your face to avoid injuries. As user of this product you
are solely responsible for handling it safely in order to ensure that neither you nor other persons or
their property suffer damages or are endangered.
• Never use your model with weak remote control batteries.
• This toy is only designed to be used in a home environment.
• CAUTION: Do not start up and fly when persons, a nimals or any obstructions are within the flying
range of the helicopter.
• Exactly observe the instructions and warnings for this product and for any possible additional equipment
(battery charger, rechargeable batteries etc.) being used by you.
• Should the helicopter come into contact with any living thing or solid object, immediately return the
gas control to zero, in other words the left-hand joystick must be at the stop at the bottom of the slide!
• Avoid any moisture as this might do damage to the electronics.
• Do not change or modify anything on the helicopter.
If you do not agree to these terms please immediately return the complete helicopter model in new and
unused condition to the retailer.
Important information concerning Lithium Polymer rechargeable batteries
Lithium-Polymer (LiPo) rechargeable batteries are significantly more sensitive than traditional alkali- or
NiMH-rechargeable batteries which are normally used with radio control units. Therefore the instructions
and warnings have to be observed in detail. In case of improper use of LiPo rechargeable batteries there is
a danger of fire. Always follow the manufacturers´ instructions if you dispose of LiPo rechargeable batteries.
Regulations on disposal for waste electrical and electronic equipment (WEEE)
This symbol, showing refuse bins with a cross through them, denotes that empty
batteries, rechargeable batteries, button cells, recharge able battery packs, equipment
batteries, disused electrical equipment, etc. should not be disposed of in domestic
refuse, as they are harmful to the environment and health. Please help to preserve
environment and health and talk to your children about the correct disposal of used
batteries and disused electrical equipment. Batteries and disused electrical equipment should be handed in to
the usual collection points where they can be properly recycled. Do not mix dissimilar battery types or employ
new and used batteries together. Empty batteries should be removed from the product. Do not recharge non-
recharge able batteries due to risk of explosion. Batteries are to be inserted with the correct polarity.
WARNING!
Rechargeable batteries are only to be charged by adults. This toy contains batteries that are non-re-
placeable. Supply terminal are not to be short-circuited. The toy shall only be used with a power supply for toys.
The power supply is not a toy. (5V d.c. / USB (0.5 A))
WARNING: For the purposes of recharging the battery,
only use the detachable supply unit provided with this toy.
Battery chargers used with the toy are to be
regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage,
they must not be used until the damage has been repaired. The toy is only to be connected to Class II equipment
bearing the following symbol.
or
FCC statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the us-
er's authority to operate the equipment.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If the product does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures :
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IC statement
The device contain license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Eco-
nomic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. The device must not cause interference;
2. The device must accept any interference, including interference that may cause undesired operation of the device.
Guidelines and warnings for the use of LiPo rechargeable batteries
• You have to charge the attached 3.7 V
180 mAh / 0.66Wh LiPo rechargeable battery in a safe place
and at a safe distance to flammable material.
• Never leave the battery unattended while it is charging
• After a flight, the rechargeable battery has to cool down to the ambient air temperature before charging it.
• You must always use the corresponding LiPo charging unit (USB cable / remote control). In case of
non-compliance with these directions there is a danger of fire resulting in a health risk and/or damage to
property. NEVER use any other battery charger.
• Should the rechargeable battery swell or deform while discharging or recharging, you have to immediately
stop charging or discharging the battery. Take the battery out as quickly and carefully as possible and place
it in a safe and open area offside any inflammable material and watch it for at least 15 minutes. In case you
continue charging or discharging a battery which has already started to swell or deform there is a danger of
fire! Even in case of slight deforming or ballooning the rechargeable battery has to be taken out of operation.
• Store the rechargeable battery at ambient temperature in a dry place.
• Always recharge the battery after use to prevent its becoming deep discharged. After use, the bat-
tery must be allowed to cool down for at least 20 minutes before it can be fully recharged. Recharge
the battery occasionally (suggested every 2–3 months). Supply terminals are not to be short-circuit-
ed. Failure to treat the battery as described above can lead to its becoming defective. Never leave
the battery unattended while it is being charged.
• When transporting or temporarily storing the rechargeable battery the temperature should be between
5-50°C. If possible, do not store the battery or the model in a car and do not expose it to direct sunlight. In
case the battery is broiled it can be damaged or catch fire.
Note: If the battery voltage/output is low you will recognise that a considerable trim and/or controlling is
necessary to avoid that the helicopter starts trundling. This usually occurs before reaching a battery voltage
of 3 V and it is a good moment to end the flight.
Contents of package
1x Helicopter
1
1x Controller
1x Display- & charging socket
1x USB charging cable
2x 1.5 V Micro AAA batteries (non-rechargeable)
Recharging the LiPo rechargeable battery
This toy contains batteries that are non-replaceable. Make sure you only charge the LiPo rechargeable battery
supplied with the LiPo charging unit also supplied (USB cable and remote control). In case you try to charge
the rechargeable battery with a different LiPo battery charger or any other battery charger, this might cause
serious damages. Please carefully read the previous chapter about warnings and guidelines on the usage of
rechargeable batteries before proceeding.
Charging via computer:
2
• Connect the USB charging cable with the USB port of a computer. The LED on the USB charger cable lights
green indicating that the charger unit is correctly connected to the computer. If you plug in a helicopter with
a discharged battery, the LED on the USB charging cable does not light up; this shows that the helicopter
battery is being charged. The USB charging cable and the charging socket on the helicopter are designed
to make incorrect connection impossible.
• It takes about 30 minutes to recharge a discharged battery (but NOT a deep-discharged one). When the
battery is fully charged, the LED display on the USB charger cable lights up green again.
Note: When supplied, the lipo-battery is already partially charged so the first charging cycle may well take less time.
It is essential to follow the connection sequence given above! If you have the charger cable only
connected to the helicopter, and not to a source of electricity, a green LED display indicates that there
is still power in the battery. The green LED display does not necessarily indicate the battery is still
adequately charged. While charging, the power switch must be in the "OFF" position.
Inserting the batteries in the remote control
Open the battery compartment with a screwdriver and insert the batteries in the remote control. Please
3
keep in mind the correct polarity. After having closed the compartment you can check all functions of the
remote control with the help of the power-switch on the front. With the power-switch turned ON and proper
functioning, the top center LED on the remote control will light up red. When the control LED flashes rapidly,
the batteries in the controller must be changed.
Frequency bind between model and remote control
The Carrera RC helicopter and the remote control are frequency bound at purchase. Should there occur
4
any problems with the communication between the Carrera RC helicopter and the remote control at the
beginning, please carry out a new frequency bind.
• Remove the model from its presentation plinth.
• Switch on the model at the ON/OFF switch.
• The LED in the helicopter now flashes in rhythmically-accelerating sequence.
• Switch on the controller at the ON/OFF switch. Slide the left joystick, i.e. the gas lever, completely to the
top and back down again into the zero position. The bond will take place automatically. While connecting,
the controller emits a signal tone.
• Hold the model so that the rotor blades are horizontal.
• Allow the helicopter a few moments until the system is correctly initialised and is ready for operation.
• The control LED now lights continuously once again, indicating that the connection is ended.
Checklist for flight preparation
This checklist does not replace the contents of the operating instructions. Although it can be used as a quick-
start-guide we strongly advise to first read the operating instructions in detail before you proceed.
• Check the contents of the package
• Connect the charging unit to the source of power.
• Charge the lipo-battery as described in the section "Charging the lipo-battery".
• Fit two AAA batteries in the controller, making sure their polarity is correct.
• Look for a suitable environment for flying
4
• Proceed as described in
.
• Repeat the above points as required, if you wish to fly more helicopters at the same time.
• Check the control system
• Start the helicopter from one hand. At the same time, hold the controller in the other hand so that you can
take over control of the helicopter immediately.
WARNING! THE MODEL FLIES FORWARDS BY ITSELF AND CAN ONLY BE CONTROLLED IN HEIGHT
AND DIRECTION
• Make yourself familiar with the control system
• Trim the helicopter as necessary as described under "Controlling the helicopter".
• The helicopter is now ready to be flown.
• If the helicopter displays no functions, retry the above binding procedure.
• Fly the model
• Land the model
• Switch the model off at the ON/OFF switch (3 sec.).
• Always switch off the remote control last
Range of functions of the remote control
1. Antenna
5
2. Power switch (ON / OFF)
3. Control LED
4. Gas
5. Tail (spinning in circles)
6. Trimmer for tail
7. Battery compartment
3
4
Description of helicopter
1. Coaxial rotor system
6
2. Socket for charging the lipo-battery
3. Display- & charging socket
4. ON-/OFF switch
Controlling the helicopter
In case you don´t know the control functions of your Carrera RC helicopter yet, please take some min-
7
utes before the first flight in or to make yourself familiar with them. The descriptions left or right refer to
the view out of the cockpit (pilote´s view). Push the throttle up to increase the rotational speed of the main
rotor blades. Increase the rotational speed of the main rotor blades and the model will start to ascend.
If you push down the throttle and thus reduce the rotational speed of the main rotor blades the helicopter
will descend. When the model has lifted off the ground you can get it into stationary hovering without abrupt
ascending or descending by carefully moving the throttle upwards and downwards.
Move the right lever (tail) to the left and the helicopter's nose turns (yaws) round the main rotor's axis in
8
a circle to the left. Move the right lever (tail) to the right and the helicopter's nose turns (yaws) round the
main rotor's axis in a circle to the right. Use the trimmer for tail until you have reached a stable neutral position
of the helicopter when hovering, without moving the right lever (tail).
WARNING! THE MODEL FLIES FORWARDS BY ITSELF AND CAN ONLY BE CONTROLLED IN
9
HEIGHT AND DIRECTION
After having made yourself familiar with the main control functions and having chosen an appropriate area for
flying the helicopter, you can start the first flight.
Choosing the flight area
When being prepared for the first flight you should choose a closed room without any persons
10
or obstacles which is as big as possible. Due to the size and controllability of the helicopter
experienced pilotes may be able to fly the helicopter in relatively small rooms. For your first flights we
strongly recommend to choose a room with a minimum floor space of 5 x 6 metres and 2.40 metres of
height. After having trimmed your helicopter for flight and having made yourself familiar with the
controlling and its functions you may start flying in smaller and less open environments.
This toy is intended to be used in domestic area (house and garden) only.
Troubleshooting
Problem: Remote control does not work.
Cause:
The ON/OFF-power switch is turned "OFF".
Solution: Turn the ON/OFF-power switch "ON".
Cause:
The batteries have been wrongly inserted.
Solution: Check if the batteries have been correctly inserted.
Cause:
The batteries do not have enough power.
Solution: Insert new batteries.
Problem: The helicopter cannot be controlled with the remote control
Cause:
The power switch on the reomote control is turned "OFF".
Solution: First turn the power switch on the remote control "ON".
Cause:
The remote control is possibly not correctly frequency bound with the receiver on the helicopter.
4
Solution: Link as described in
.
Problem: The rotor blades do not rotate.
Cause:
The power switch on the model or the controller is at "OFF"
Solution: Turn the ON/OFF-power switch "ON".
Cause:
The rechargeable battery is too weak or has run out of power.
Solution: Charge the battery (see chapter "Charging the battery").
Problem: The helicopter does not lift.
Cause:
The rotor blades rotate too slowly.
Solution: Push the throttle up.
Cause:
The battery´s power is not sufficient.
Solution: Charge the battery (see chapter "Charging the battery").
Problem: During flight, the helicopter loses speed and height without any obvious reason.
Cause:
The battery is too weak.
Solution: Charge the battery (see chapter "Charging the battery").
Problem: The helicopter lands too quickly.
Cause:
Loss of throttle control.
Solution: Push the throttle down slowly.
Cause:
Throttle has been pushed down too quickly.
Errors and changes excepted · Colours / final design – changes excepted
Technical changes and design-related changes excepted · Pictograms = symbolic photos
Chère cliente ! Cher client !
Nous vous félicitons pour l'achat de votre maquette d'hélicoptère Carrera RC qui a été fabriqué selon le
niveau actuel de la technique. Nous avons toujours pour ambition d'améliorer et de perfectionner nos pro-
duits et nous réservons la possibilité de réaliser des modifications techniques relatives à la présentation et
design de nos produits. Les divergences de faible importance du produit, que vous avez acheté, par rapport
aux données et illustrations de ces instructions de montage et d'utilisation ne sauraient donner lieu à des
réclamations de ce fait. Ces instructions de montage et d'utilisation forment partie intégrale du produit. Le
fabricant décline toute responsabilité en cas d'inobservation des instructions de montage et d'utilisation et
des consignes de sécurité y figurant. Veuillez conserver ces instructions de montage et d'utilisation, afin que
vous puissiez les consulter ultérieurement et et les remettre à tout utilisateur de ce véhicule si besoin est.
Vous trouverez la version la plus actuelle de ce mode d'emploi et les informations sur les pièces de
rechange disponibles sur
carrera-rc.com
dans la zone de service.
Conditions de garantie
Les produits Carrera sont des produits de qualité technique élevée qui devraient être manipulés avec
précaution. Veuillez impérativement respecter les indications du mode d'emploi. Tous les éléments
sont soumis à des contrôles approfondis (sous réserve de modifications techniques et des véhicules
destinées au perfectionnement du produit).
La responsabilité du fabricant est cependant engagée aux termes des conditions de garantie ci-après
à supposer que le produit présente des défauts : La société Carrera Toys GmbH (ci-après désignée
„Fabricant") garantit au client final (ci-après désigné „Client") selon les clauses suivantes que la maquette
d'hélicoptère Carrera RC livré au client (ci-après désigné „Produit") sera exempt de vices de matériel ou de
fabrication durant une période de deux ans à partir de la date d'achat (délai de garantie). Le fabricant élimi-
nera de tels vices selon sa propre appréciation à ses frais en les réparant ou en livrant des pièces neuves ou
FRANÇAIS
ayant subi une révision générale. La garantie ne s'étend pas aux pièces d'usure (par exemple la batterie, les
pales de rotor, le recouvrement de cabine, la roue dentée), aux dommages dus à un traitement/utilisation non
conforme ou à des interventions externes. D'autres revendications du client, en particulier de dommages et
intérêts, contre le fabricant sont exclus. Les droits contractuels ou légaux du client (exécution ultérieure, rési-
liation du contrat, réduction du prix, dommages et intérêts) vis-à-vis du vendeur correspondant, droits existant
si le produit n'était pas exempt de vices lors du transfert du risque, ne sont pas concernés par cette garantie.
Les droits issus de cette garantie du fabricant spéciale n'existent que si
• le vice réclamé ne repose pas dans des dommages qui résultent d'un emploi non conforme ou non dapté
aux directives prescrites dans le mode d'emploi,
• il ne s'agit pas de signes d'usure dus à l'emploi,
• le produit ne présente aucun signe qui permette de constater que des réparations ou d'autres interventions
ont été effectuées par des ateliers non autorisés par le fabricant,
• le produit n'a été utilisé qu'avec des accessoires autorisés par le fabricant et
• si le produit est envoyé avec le bon d'achat original (facture /bon de caisse) et la carte de garantie entière-
ment remplie, produit sur lequel aucune modification autonome n'a été réalisée.
Les cartes de garantie ne sont pas remplaçables.
Avis destinés aux États de l'Union européenne : nous attirons l'attention sur l'obligation de garantie lé-
gale du vendeur, pour autant que cette obligation de garantie ne soit pas restreinte par les conditions de la
présente garantie.
Déclaration de conformité
Par la présente, Carrera Toys GmbH déclare que ce modèle, y compris le contrôleur, est conforme aux
exigences fondamentales des directives CE suivantes : Directive CE 2009/48 et les autres réglementations
pertinentes de la Directive 2014/53/UE (RED).
L'original de la déclaration de conformité est à votre disposition sur le site internet carrera-rc.com.
Puissance de fréquence radio maximale <10 dBm · Gamme de fréquences: 2400 – 2483.5 MHz
Avertissements !
ATTENTION !
Ne convient pas aux enfants de moins de 3 ans. Danger d'étouffement
– Présence de petits éléments pouvant être avalés.
ATTENTION ! Danger d'écrasement en cours de fonctionnement ! Supprimez tous les
matériaux d'emballage et fils de fixation avant de remettre ce jouet à l'enfant. Veuillez
conserver l'emballage, l'adresse ainsi que le mode d'emploi pour référence ultérieure
en cas d'éventuelles questions ou de besoin d'informations. Conserver ces instructions pour pouvoir
éventuellement les relire ultérieurement. Remarque pour les adultes : vérifiez que le jouet est assem-
blé conformément aux instructions. L'assemblage doit être effectué sous la surveillance d'un adulte.
ATTENTION ! Ne convient pas aux enfants de moins de 8 ans.
Ce produit n'est pas conçu pour être utilisé par des enfants sans la surveillance d'une personne chargée de
l'éducation. Piloter l'hélicoptère nécessite une certaine habileté que les enfants doivent acquérir sous la sur-
veillance directe d'un adulte. Avant la première utilisation : lisez ces instructions avec votre enfant. Un
emploi non conforme peut entraîner de graves blessures et/ou des dommages matériels. Il doit être piloté avec
prudence et circonspection et exige certaines facultés mécaniques et mentales. Le mode d'emploi contient des
consignes de sécurité et des prescriptions ainsi que des indications sur l'entretien et l'emploi du produit. Il faut
impérativement avoir lu complètement et compris ce mode d'emploi avant la première mise en service. C'est la
seule manière d'éviter les accidents accompagnés de blessures et de dommages.
Pour des raisons de sécu-
rité, ce jouet doit uniquement être utilisé dans un espace suffisamment grand. Ne faire voler que dans
des pièces closes qui offrent suffisamment de place et suivre toutes les consignes telles qu'elles sont
recommandées dans ce mode d'emploi.
Il convient de tenir l'hélice (rotor) à distance des mains, des cheveux
et des vêtements amples ainsi que d'autres objets tels que des clous ou des tournevis. Ne pas toucher le rotor
en mouvement. Veiller surtout à NE PAS tenir les mains à proximité des pales du rotor !
AVERTISSEMENTS : Risque de blessure oculaire. Afin d'éviter tout accident, ne pas faire voler à
proximité du visage. En tant qu'utilisateur de ce produit, vous êtes seul responsable de la sécurité de
manipulation de sorte que vous ni d'autres personnes ou leur propriété ne subissent des dommages
ou soient mis en danger.
• Ne jamais utiliser cette maquette avec des accus faibles dans le contrôleur.
• Ce jouet est uniquement destiné à une utilisation dans le cadre domestique.
• AVERTISSEMENTS : Ne pas démarrer ni faire voler l'hélicoptère tant que des personnes, animaux
ou obstacles se trouvent dans le périmètre de vol de l'appareil.
• Respecter exactement les instructions et les avertissements pour ce produit et l'équipement supplémentaire
éventuel (chargeur, accus etc.) que vous utilisez.
• Si l'hélicoptère entre en contact avec des êtres vivants ou des objets durs, mettre immédiatement
le levier d'accélération en position zéro, à savoir le joystick gauche doit être en butée inférieure !
• Éviter n'importe quelle humidité, car elle peut endommager le système électronique.
• Ne rien remplacer ou modifier sur l'hélicoptère.
Si vous n'êtes pas d'accord avec ces conditions, renvoyez immédiatement au commerçant la maquette de
l'hélicoptère intégrale dans sont état neuf et non utilisé.
Informations importantes sur les accus Lithium-Polymère
Les accus Lithium-Polymère (LiPo) sont nettement plus sensibles que les accus alcalins ou NiMh usuels qui
sont utilisés normalement pour les télécommandes radio. C'est pourquoi il faut respecter très strictement les
prescriptions et avertissements du fabricant. En cas de mauvaise manipulation de l'accu LiPo, il y a risque
d'incendie. Toujours respecter les indications du fabricant quand vous éliminez des accus LiPo.
5
0
Classe UAS
Publicidad
Tabla de contenido
