Belkin OmniView PRO Manual Del Usuario página 11

All manuals and user guides at all-guides.com
F1D116_OSD_AM_man.qxd 4/20/00 4:07 PM
Hardware Installation
6.
Connect the first computer's mouse cable to the OmniView
PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 mouse port
on the computer, and the other end to the PC1 PS/2 mouse port on the back of
the OmniView
If using a serial mouse cable (Belkin Part# F2N209-XX-T), connect the female
end to a DB9 serial port on the computer, and the male end to the DB9
female end of F1D116xMSE combo mouse adapter. Then connect the PS/2
end of the combo mouse adapter to the PC1 PS/2 mouse port on the back of
the OmniView
SW
Back view of OmniView
7.
Connect the first computer's keyboard cable to the OmniView
another PS/2 cable (Belkin Part# F2N036–XX), connect one end to the PS/2
keyboard port on the computer, and the other end to the PC1 keyboard port on
the back of the OmniView
you will need a PS/2-AT keyboard adapter (Belkin Part# F2N018).
SW
Back view of OmniView
Back of OmniView
8.
Double check all of the connections. Make sure the keyboard and mouse cables go
to the correct ports.
9.
Repeat steps 5-7 for the remainder of the computers.
Page 9
(continued)
™ .
™ .
PC16 PC15 PC14 PC13 PC12 PC11 PC10
PC8 PC7 PC6 PC5 PC4 PC3 PC2
™ PRO
F1D116xMSE
For Serial Mouse
™ PRO. If your computer has an AT-style keyboard port,
PC16 PC15 PC14 PC13 PC12 PC11 PC10
PC8 PC7 PC6 PC5 PC4 PC3 PC2
™ ™ PRO
PRO
9
™ PRO. If using a
PC9
PC1
Back of PC
Back of PC
For PS/2 Mouse
F2N036-06
F2N025-XX-T
VGA MONITOR
RJ45 NETWORK
™ PRO. Using
Back of PC
Back of PC
PC9
PC1
VGA MONITOR
RJ45 NETWORK
F2N036-06
En