Wiseup T187 Guia Del Usuario página 5

6.2. Tap the gear icon and select "Device" on the setting page.
6.3. Tap "Reset to default" to reset the camera to factory default settings.
VII. Charging
7.1. Connect the camera to an outlet AC power supply using the power adapter and USB cable
included.
7.2. It will take 7 hours to obtain a full charge.
7.3. The camera can record video up to 3 hours on a single charge.
Frequently Asked Questions
Q1: Why Camera WIFI signal is not appearing on my WIFI page?
A1: There are 4 solutions to this question:
1. Keep your phone or mobile device within the camera's WIFI hotspot range, refreshing the
WIFI signal page. It may take up to 1 minute for the hotspot to become recognizable on your
phone or mobile device's WIFI setting page.
2. Shut off your phone or mobile device's WIFI function for a while, then turn it on to search again.
3. The camera is in low battery, connect it to an outlet AC power supply using the USB cable
and power adapter included.
Q2: The camera did not record any video?
A2: Make sure the Micro SD card has been fitted well. If not, you need to take out the SD card,
format it on your PC computer and try it again.