Wiseup GL5000 Manual De Usuario página 3

3.2.3 Press the power button once to stop video recording, the blue indicator light will come on and
stay illuminated, indicating that the camera is back to standby mode automatically.
[Note]: It is 10min for each video clip; the video format is AVI, the video resolution is 1920x1080; the camera
will stop video recording automatically when the memory card is full.
3.3 CAMERA / STILL PHOTOGRAPHY
3.3.1 Power on the camera by pressing and holding down the Power Button for 2 seconds. Both
blue and red indicator lights will come on, then the red indicator light will flash once and then turn off,
the blue indicator light will stay illuminated, indicating that the camera has entered into standby
mode automatically.
3.3.2 Press the Power Button once to take a photo. The blue indicator light will flash once every
time you take a photo.
3.4 DATE/TIME STAMP SETUP
3.4.1 Power off the camera.
3.4.2 Connect the camera to a proper PC computer with the USB cable when the camera is
powered off.
3.4.3 Removable disk drive folder appears.
3.4.4 Click on the drive in the root directory and create a txt document file named "time.txt".
3.4.5 Input the current date and time in the txt file with the correct format: Year.Month.Date
Hour:Minute:Second Y. (For example: 2018.03.14 11:40:49 Y). Save this file.
3.4.6 Restart the camera and the system will upgrade the program automatically.
[Note]: If you don't need the time and date stamp on the video footage, change "Y" into "N". (For example:
2016.04.12 14:24:32 N).
3.5 VIDEO/PHOTO FILE UPLOADS
3.5.1 Connect the camera to a proper PC computer with the USB cable.
3.5.2 Removable disk drive folder appears.
3.5.3 Click on the drive in the root directory to view, copy or delete video and image files.
3 / 24