Intended Use; Safety Informations; Required Tools - BGS technic 8335 Manual Del Usuario

Crankshaft Sealing Ring Mounting Tool for VAG

INTENDED USE

This Tool is made to install crankshaft sealing on VAG
models, e.g. VW Golf, Touran and Audi A3, A4 with
1.4i turbo, 1.4 & 1.6 Petrol Direct Injection, 1.9/2.0 SDI,
2.0 Common Rail Diesel engines and it's to be used as
OEM T10134.
CAUTION
Read the operating instructions and the included safety informations carefully before using the
product. Use the product correctly, with caution and only for the intended purpose.
Failure to observe the safety informations can lead to damage, injury and voiding of the warranty.
Please keep these instructions in a safe and dry place for future reference.
Include the operating instructions if you pass the product on to third parties.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.

REQUIRED TOOLS

Torque Wrench 5 - 60 Nm
3x Hexagonal Bolts M6 x 35 mm
Vernier Gauge (or straight edge and feeler gauges)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8335
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed