Intended Use; Safety Informations - BGS technic 8690 Manual Del Usuario

TOOLS
1 Camshaft Retaining Tool,
to be used as OEM T10199
2
Camshaft Retaining Tool,
to be used as OEM T10199/1

INTENDED USE

This tool set is used to hold the camshaft sprockets when loosening or tightening them and for
clearance-free mounting of the camshaft sprockets. The tools included are suitable for VAG engines
with 5 & 10 cylinders, built in VW T5 (2004-), Touareg (2003-) und Phaeton (2003-).
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS

• Do not use the tool if parts are missing or damaged.
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
• Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
Keep children and other unauthorized persons away from the work area.
•
• Do not allow children to play with the tool or its packaging.
Be careful when working on hot engines because of the risk of burn injuries.
•
• If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
•
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
•
timing again.
• Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
Do not use setting tools for camshaft and crankshaft as a counter-holder, during loosening or
•
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Crankshaft Locking Tool
for VAG 5- and 10- cylinder
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8690
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed