General safety instructions
USING ELECTRICAL APPLIANCE YOU MUST ACT IN COMPLIANCE WITH THE
FOLLOWING INSTRUCTIONS
Read the instructions carefully before use.
Never touch the hot surface; only use the handles.
To avoid an electrical shock, check the appliance regularly for damages to the
appliance, the cable or plug. If damages are found, do not use the appliance but
bring it in for repair to a qualified technician.
Take extra care in the presence of children; never leave the working appliance
with children without supervision.
Never immerge the appliance, cable or plug into water or any other liquid.
Do not use any parts that are not delivered with the original pan; this might
cause danger.
Never place the appliance on or near a hot plate or any other heating object,
explosive or gas.
Never carry the appliance while still working: extra care must be taken if the pan
contains hot oil or fat.
Turn the regulator to the required temperature before you plug in.
The appliance should only be used in domestic environment and for the use
that it has been designed for.
THESE INSTRUCTIONS MUST BE FOLLOWED.
AUTOMATIC TEMPERATURE REGULATOR
THE RIGHT TEMPERATURE WILL BE KEPT AT THE SET TEMPERATURE
OPERATION INSTRUCTIONS
RIGHT CONSTRUCTION: BEFORE USING CLEAN THE HEAT PLATE AND COVER
COMPLETELY
1). PUT THE TEMPERATURE SCALE TO "OFF" POSITION AND PUT THE
AUTOMATIC TEMPERATURE REGULATOR IN THE INLET.