Tristar PZ-2964 Manual Del Usuario página 16


Do not put the automatic temperature regulator on the heat plate.

It is not permitted to touch the heat plate.

Do not use cleaner, nylon brush or metal brush, the surface of the heat plate
would be damaged.

The plate must be cleaned after using with a wet cloth. Food rests or fat on the
surface will lead to fire
SAFETY MEASURES AND PROPOSALS
In order to avoid shock, fire or functions errors, the following caution measures must be
followed.
- The power input must be 230V;
- The cable is not permitted to be curved and must be undamaged.
- Do not use the cable to pull the plug out of the socket.
- Do not immerge the heat plate into water.
- After cleaning, the appliance must be dry, and then you can re-use it.
The heat plate is not allowed to be used in the following places.
On an unsteady place or on inflammables surface (newspaper, paper,
-
pvc-tablecover carpet etc.)
The hotplate must be min .15cms far from the wall or other objects.
-
THE AUTOMATIC TEMPERATUR REEGULATOR
o
The automatic temperature regulator is a high sensitive part, so handle with
care; prevent falling or shock.
o
Only use the automatic temperature regulator supplied with this appliance
o
Insert the automatic temperature regulator in the right place. If you pull out the
automatic temperature regulator, do not use the cable but use the connector of
the automatic temperature regulator and pull it out.
o
If the automatic temperature controller is damaged, stop using it; bring it in for
repair by a qualified technician.
o
Before inserting or pulling the automatic temperature controller, make sure it is
in the OFF position and the plug is not in the supply socket.
CLEANING
CLEAN THE PAN AFTER USE AS FOLLOWS:
NAME METHOD REMARK