FLORABEST FRMA 36/1 A1 Manual Del Usuario página 32

GB IE
age and, if necessary, have
it repaired,
- if the apparatus starts to
vibrate in an unusual way
(check immediately!).
Maintenance and Storage:
• During maintenance of the cut-
ting blades, be aware of the
fact that even if the power sup-
ply is switched off, the cutting
blades can be set into motion.
• When servicing the cutting
blade on it that even if the volt-
age source is switched off, the
cutting blade can be moved.
• Ensure that all nuts, bolts
screws are tightened firmly and
the equipment is in safe work-
ing condition.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service centres
that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
32
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid fin-
gers being trapped between the
rotating blades and fixed parts
of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.
Electrical Safety:
• The plug of the charger must fit
into the socket. The plug must
and
not be modified in any way.
Do not use any adapter plugs
together with electric tools that
have a protective earth. Un-
modified plugs and matching
sockets reduce the risk of elec-
tric shock.
• Avoid body contact with
earthed surfaces such as pipes,
radiators, cookers and refriger-
ators. There is an increased risk
of electric shock if your body is
earthed.
• Do not expose electric tools to
rain or wet conditions. The pen-
etration of water into an electric
tool increases the risk of electric
shock.