La Sommeliere CAF52 Manual De Instrucciones página 17

Before discarding an old wine cabinet or other old appliance, remove the door and leave the shelves in
place so that children cannot easily climb inside.
Before connecting your wine into an electrical outlet, let it sit upright for about 2 hours. This reduces the
risk of malfunction of the refrigeration system due to handling during transportation.
Place the wine cabinet in a place where it will not be exposed to direct sunlight or other heat sources
(stove, heater, radiator, etc...). Direct sunlight can damage the acrylic coating. The heat sources may
increase electrical consumption. If the ambient temperature is extremely cold, it may prevent the proper
functioning of the device.
Install the unit on a flat, horizontal surface and strong enough to support the weight of the
unit.
Never block the vents because the device may overheat and stop automatically. You must then wait until
it has cooled sufficiently reconnect the device
Do not install the unit in a hot or humid environment, such as near a heater or furnace.
Before using your device for the first time, clean the insides surfaces and seal the seams with a damp
cloth.
For your personal safety, this appliance must be connected to a mains socket outlet with a
grounded, delivering a voltage of 220-240V, 50 Hz power supply must be respected
Wait 24h after the cellar has been moved before plugging. To preserve the cooling refrigerant, don't
incline more than 45° if possible when you move the product.
When selecting a location for your appliance you should make sure the floor is flat and firm, and the
room is well ventilated. An average ambient temperature must be observed. This temperature is specific
according to the climatic class of the device: N: This refrigerating appliance is intended to be used at
ambient temperatures ranging from 16 °C to 32 °C
17