Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAY PANEL
1
Button to activate / deactivate the light
2
Indicates whether the winter function is on by an illuminated indicator light
3
Display of the set temperature in the upper zone of the cellar. To display the actual
temperature, simultaneously press the temperature adjustment buttons (5) and (6).
The actual temperature is displayed. After 10 seconds the cellar returns to the initial
mode and automatically indicates the programmed temperature.
4
Display of the set temperature in the lower area of the cellar. To display the actual
temperature, simultaneously press the temperature adjustment buttons (5) and (6).
The actual temperature is displayed. After 10 seconds the cellar returns to the initial
mode and automatically indicates the programmed temperature.
5
Lower compartment temperature adjustment knob (between 12-20 ° C). Press this
button to decrease the Temperature by one degree Celsius or Fahrenheit until the
desired temperature is obtained. Once the minimum temperature is reached, the
temperature returns to the maximum temperature again. Lowering or raising the
temperature of the cellar is done with the same command.
6
Upper compartment temperature adjustment knob (between 5-12 ° C). Press this
button to decrease the Temperature by one degree Celsius or Fahrenheit until the
desired temperature is obtained. Once the minimum temperature is reached, the
temperature returns to the maximum temperature again. Lowering or raising the
temperature of the cellar is done with the same command.
7
Button to turn the device on or off without unplugging it.
When you plug the device into a power outlet, it automatically displays the set temperature.
To display the actual temperature, simultaneously press the temperature adjustment buttons (5) and (6). The
actual temperature is displayed. After 10 seconds the cellar returns to the initial mode and automatically
indicates the programmed temperature.
Select the unit of measurement in degrees Celsius by the ° C symbol or in Fahrenheit by the ° F symbol by
pressing the button (6) for 3 seconds.
VACATION MODE
Vacation mode is available for observing certain religious holidays. This mode turns off the displays, interior
lighting and audible alarms and prevents them from turning back on. Normal cooling operations will still take
place.
To start holiday mode, press the power (7) and light (1) buttons simultaneously for at least 3 seconds. The
indicator light will flash four times and confirm that vacation mode is activated. Vacation mode can be stopped
by repeating the above process.
Vacation mode will automatically end after 96 hours.
18
Publicidad
Tabla de contenido
