Package Contents; Technical Data - Parkside PAHE 20-Li C3 Manual Del Usuario

Package contents

1 cordless pole saw 20V
1 saw head
1 shoulder strap
1 blade guard
1 Blade
1 saw chain
100 ml organic chain oil
1 assembly tool
1 operating instructions

Technical data

Cordless Pole Saw 20V PAHE 20-Li C3
Rated voltage
Max. rotational speed 2500 min
No-load speed
Weight (without battery, cutting tool
and strap)
Oil tank volume
Cut length
Blade
Saw chain
Use only the following battery to
operate the cordless tool PAP 20 A3*
Type
Rated voltage
Capacity
Cells
Use only the following high-speed battery
charger to charge the cordless tool PLG 20 A2*
INPUT
Rated voltage
Power consumption
Fuse (internal)
OUTPUT
Rated voltage
Charging current
Charging time
Protection class
PAHE 20-Li C3
20 V (direct current)
-1
max. 5 m/s
approx. 2.6 kg
65 cm 3
approx. 200 mm
8" AM08-33-507P
050 33E
LITHIUM ION
20 V (direct current)
4000 mAh/80 Wh
10
230–240 V ∼, 50 Hz
(alternating current)
85 W
T3.15A
3.15 A
21.5 V (direct current)
3.5 A
approx. 80 min
II / (double shielded)
* BATTERY AND CHARGER NOT INCLUDED IN
DELIVERY
Noise and vibration data
Measured values for noise determined in accord-
ance with EN 62841-1 & EN ISO 11680-1. The
A-rated noise level
of the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Guaranteed sound power level L
Wear ear protection!
Vibration values (vector total of three directions)
determined in accordance with EN 62841-1 &
EN ISO 11680-1:
Vibration at front handle
Vibration emission value
Uncertainty
Vibration at rear handle
Vibration emission value
Uncertainty
WARNING!
► Depending on the use and the activities to be
performed, the sound pressure level must be
reduced to a level that does not adversely
affect the health of the operator. The sound
pressure level at the workplace may exceed
80 dB (A). In this case, sound insulation
measures are required for the operator (e.g.
wearing hearing protection).
► Also reduce the risk of vibration, e.g. the risk
of white-finger disease due to frequent breaks
in work where like rubbing their palms
together! Translated with www.DeepL.com/
Translator (free version)
NOTE
► The vibration level specified in these instruc-
tions has been measured according to a
standardized measurement procedure and
can be used for equipment comparison. The
vibration emission value given may also be
used for an initial assessment of exposure.
L = 82.4 dB (A)
pA
K = 3 dB
pA
L = 92.2 dB (A)
WA
K = 2.35 dB
WA
= 95 dB (A)
WA
a = 2.689 m/s 2
h,D
K = 1.5 m/s 2
2
a = 2.220 m/s
h,D
K = 1.5 m/s 2
GB │ IE │
3 ■