Silvercrest SKMP 1300 D3 Instrucciones Breves página 20

3. Turn it anticlockwise at the two han-
dles 25 until it stops.
Note that the lower ridges 26 at the
base of the blade assembly 7 must en-
gage under the upper ridges 27 in the
blender jug 5. Check that it is secure.
25
Mounting the blender jug
1. Reach into the recessed grip and re-
move the cover 8 upwards.
18 GB
2. Position the blender jug 5 on the drive
unit 9 so that the white arrow ( ) on
the bottom of the blender jug points to
the open lock symbol.
25
26
3. Turn the blender jug 5 clockwise until it
is firmly in place. The white arrow ( )
now points to the closed lock symbol.
Adding ingredients
27
• First add the liquid ingredients to the
blender jug 5, and then the solid ones.
• Cut the solid ingredients into small piec-
es in advance, so that the pieces do not
get jammed in the blades.
• During blending, you can add ingredi-
ents through the refill opening 3 in the
lid 2.
Mounting the lid
NOTES:
• For safety reasons, the blending process
will only start when the lid 2 is correctly
mounted.
• To make it a little easier to close the
lid 2, place a few drops of cooking oil
onto a cloth and rub it over the seal 4.