6
INSTALLING TOP CORNER CAPS
1. A - C Place the Top Corner Caps [11] on the top of the corner posts. Using a Step Ladder will be helpful for this step. Mark
the hole locations and drill holes in the tops of the door and fixed panels using a 1/8" drill bit as shown. Secure the
Top Corner Caps using the M4x12 Screws and Washers. Place Screw Cover Caps over the screw heads.
7
APPLYING SILICONE and INSTALLING
PROFILE COVERS
1. Install the Profile Covers [12] on the top of the Wall Posts.
1
1
1
VIEW FROM
INSIDE
NOTE: ALLOW
24 HOURS FOR
SILICONE TO DRY
BEFORE USE.
1A
1B
1C
CHANGING SIDES OF DOOR OPENING
FULL LENGTH
HANDLE
If the door is to be assembled so the
door opens on the right side, rotate
the door panel as shown below.
7
1/8" drill bit
Screw
M4x12
7 10 35 1- 10 0 Rev. B 6 /16