Preparing The Projector - Epson EasyMP EMP-1815 Guía De Conexión Rápida

Preparing the Projector

To connect the wireless LAN, install the wireless LAN
unit on the projector.
Confirming the projector's network settings
The following explains how to set up the wireless LAN by operating the
remote control (supplied).
Use the [ ] button to move and the [Enter] button to confirm.
Procedure
1
Press the [Power] button on the remote
control to turn on the projector.
2
Press the [Menu] button on the remote
control.
The configuration menu is displayed.
3
Select "Network"
The network menu is displayed.
4
Select "To Network Configuration"
The Network setting screen is displayed.
Check the orientation of the supplied
Wireless LAN unit, and install it to the
projector.
Configuration menu
7