Maintain The Rimage 2000I; Preventative Maintenance Schedule - Rimage 2000i Guia Del Usuario

Maintain the Rimage 2000i

Regular preventative maintenance of your Rimage 2000i can help to ensure error-free recordings and clean printed labels.
Maintenance involves cleaning the system, cleaning the ink cartridges, and replacing the fan filter.
Use the information in this section to keep your Rimage 2000i in optimum operating condition.
n
n
Caution: To avoid damaging the Rimage 2000i during maintenance:
•
Never use oils, silicone, or other lubricants on any part of your Rimage 2000i.
•
Use only non-abrasive cleaners to wipe down the surfaces of your Rimage 2000i.
•
Do not pour cleaner directly onto your Rimage 2000i. Instead, apply the cleaner to a lint-free cloth first.
•
When you spray compressed air, make sure that no liquid drips into your system.

Preventative Maintenance Schedule

-
Important! Failure to follow the maintenance schedule outlined below may void your warranty.
Materials
Mandatory
Lint-free cloth
Non-abrasive, all-purpose cleaner
Dry, lint-free cloth
100763_M
All manuals and user guides at all-guides.com
Task
1. With the Rimage 2000i powered
on, place your hand next to the
fan to make sure that the fan is
operating.
Tip: If you do not feel air
blowing, the fan is not
operating and must be
replaced. Contact your
Rimage reseller.
2. Power off the Rimage 2000i.
3. Disconnect the power cord.
4. Wipe down all exterior surfaces
of the autoloader.
Tip: Your system may require
more frequent maintenance
if it is used in a dusty area,
such as a store or warehouse.
Wipe down the glide strips where the
lift arm rollers touch the system.
Glide
Strips
The preventative maintenance schedule is continued on page 22.
Maintain the Rimage 2000i
Frequency
Weekly
Weekly
21