Introduction; About This User Guide; About Your Product - Rimage 2000i Guia Del Usuario

Introduction

This manual provides the information needed to operate, identify the parts of, and configure the printing preferences for the
Rimage 2000i. To set up and install your Rimage 2000i, refer to the Rimage 2000i Setup and Installation Guide included with
your product.

Note: There are two setup and installation guides for the Rimage 2000i, one for Rimage 2000i Software, and one for
OfficeNET Software Suite. Make sure you use the correct setup and installation guide for your Rimage 2000i.

About this User Guide

•
While we try to maintain all versions of our manuals and documentations, please note that the English version found on
our website always contains the most up-to-date information.
•
Unless otherwise indicated, all Windows navigation statements are Windows XP paths. Windows Vista, Windows 2000,
and Windows Server 2003 navigation may differ slightly.
•
These symbols are used throughout the manual to help clarify information:

Note: A Note provides supplemental information or information that may apply only in special cases. For example,
memory limitations, equipment configurations, or details that apply to specific versions of a program would be
included in a Note.
Tip: A Tip provides techniques and procedures to help with your specific needs. A Tip suggests alternative methods
that may not be obvious and helps you understand the benefits and capabilities of the product.
-
Important! An Important note provides information essential to the completion of a task. You can disregard
information in a note or tip and still complete a task, but do not disregard an Important note.
n
n
Caution:nA Caution indicates that failure to observe this guideline could result in loss or damage to the equipment,
product, software, or data.
,
,
Warning!nA Warning indicates that failure to follow this guideline could result in bodily injury to personnel operating or
maintaining the equipment.

About Your Product

The Rimage 2000i is part of the Desktop series of autoloaders. It is a robotic-controlled autoloader with two recorders, a two-
line display panel, and an embedded 480i printer. The Rimage 2000i records and prints discs. When the discs are finished, the
Rimage 2000i places them in the output bin.

Notes:
•
The terms "480i printer" and "Rimage 2000i printer" are used throughout this guide to refer to the embedded 480i
printer.
•
Your Rimage 2000i may not look exactly like the model featured in this user guide.
The Rimage 2000i operates with either Rimage 2000i Software or OfficeNET Software Suite. When installed with OfficeNET
Software Suite, the Rimage 2000i can be shared on a network, allowing all users to create discs from their desktops. For more
information about setting up and submitting orders over a network, refer to the Rimage Advance Setup (Networking) Guide
available at www.rimage.com/support. From the Support menu select: Desktop Series > Rimage 2000i > User Manuals tab.
100763_M
All manuals and user guides at all-guides.com
Introduction
1