TEUFELBERGER HipSTAR FLEX Información Del Fabricante E Instrucciones De Uso página 7

ASSEMBLY
OD LOOP 7MM T:
FIGURES 1 - 4, PAGE 4
When making the wraps, be sure that the ropes
do not cross one another. The ropes must be
arranged parallel to one another.
OP 8mm e2e P:
hipSTAR FLEX 11.5mm: OP 8mm e2e P can
optionally be used with a 5-fold Distel hitch or a
Valdotain Tresse (4+3), as described hereinbe-
low. Do not use a Michoacan!
hipSTAR FLEX 12.7mm: OP 8mm e2e P can opti-
onally be used with a 5-fold Distel hitch, a Valdo-
tain Tresse (4+3), or a Michoacan, as described
hereinbelow. The following illustrations describe
how to tie the knots correctly.
Valdotain Tresse (4+3), Figures 5 - 14, Page 4:
Distel hitch (5-fold), Figures 15 - 24, Pages 4-5:
Michoacan, Figures 25 - 33, Page 5:
This is what the fully assembled hipSTAR FLEX
should look like:
7