Página 1
UPPER ASSEMBLY FOR BRUSTGURT FÜR treeMOTION evo/ treeMOTION USCA treeMOTION S.light USCA/ treeMOTION treeMOTION S.light Herstellerinformation und Gebrauchsanleitung/ Manufacturer's information and instructions for use...
Página 2
TEUFELBERGER carry out the replacement of this component for a fee. To do so, please send the product to the TEUFELBERGER address! If you are not sure as to whether you have the necessary knowledge, skills, and experience, it is absolutely necessary that you consult a compe- tent person or the manufacturer of the harness.
Página 3
Denne reservedelen skal kun skiftes ut av en sakkyndig person eller under tilsyn av en sakkyndig. Følg denne bruksanvisningen! TEUFELBERGER kan også skifte ut delen mot et vederlag. Send produktet til adressen ovenfor! Dersom du er usikker på om du har tilstrekkelig kunnskap og erfar- ing, er det viktig at du tar kontakt med en sakkyndig person eller produsenten av selen.
Página 4
RATIONALE / NOMENCLATURE NOT FOR USE AS PERSONAL PROTECTIVE EQUIPMENT RATIONALE Some climbers simply prefer to work with a shoulder system. Others like the ability to add a load carrying ‘upper harness’ during tree dismantling operations when many tools may be carried.
Página 5
HOW TO FIT HOW TO FIT THE COMPLETE UPPER ASSEMBLY Pass the webbing of the two Legs of the Return to Plastic Adjuster Buckles Lower Part under the top of each of the two and thread through Lying Rings on the harness. Ensure the text on the Junction hardware is pointing away from the body.
Página 6
ATTACHMENT / COMBINED LOAD ATTACHMENT OF CHEST-MOUNTED ROPE CLAMP a. Separate the Lower and Upper Parts b. Where the Clamp has an upper slot (e.g. Petzl Croll), the front loop may be passed directly through the slot and threaded into the metal adjuster buckle*. (fig. 3) c.