Epson EasyMP EMP-1715 Guía De Conexión Rápida página 7

Network setting "Basic" screen
Item
Projector name
PJLink Password
Web Control Password
Projector keyword
Network setting "Wireless LAN" screen
Item
Connection mode
Antenna level
Wireless LAN system
ESSID
DHCP
IP address
Subnet mask
Gateway address
DNS server (primary)/DNS server
(secondary)
In "Quick Connection Mode" one computer can connect to one projector (1 to 1 connection).
The name of the projector. The name set here is displayed in the projector list
when connected.
EMPxxxxxx (xxxxxx is a specifi c number) is displayed. Change it to an easy to
remember name.
Enter alphanumeric characters.
Enter example: EPSON001
Not necessary to set.
Not necessary to set.
When set to "ON", a keyword must be entered when connecting to the network.
This can prevent computers from making unscheduled connections and
interrupting presentations.
Usually this should be set to "ON".
Set "Quick Connection Mode".
Displays the electromagnetic wave strength for the wireless LAN.
Set the wireless LAN system as either "802.11g/b" or "802.11a".
Displayed as "EPSON". You can change it or leave it as it is.
Not necessary to set.
Explanation
Explanation
7