Mounting The Cutting Disc - Garland BEST 511 G Manual De Instrucciones

6.2.5. MOUNTING THE CUTTING DISC

1
3
3
7
5
2
1 4
4
37/148
6.2.6. HARNESS INSTALLATION
6.3. FUEL
IMPORTANT: The fuel used is highly
inflammable. If the fuel or the machine
catch fire, fight the flames with a dry dust
fire extinguisher.
Do not smoke while preparing or refueling.
Do not approach any flame or hot element
to the fuel.
Use unleaded fuel of 95° and synthetic oil
for 2 stroke engines. Motor Fuel: Mixture
(Gasoline 40: Oil 1) 2.5%.
Mix gasoline and oil in a bottle homologated for this
use. If you will mix more combustible just prepare
the amount you will use the short term. Do not use
fuel that has been stored over two months. The
fuel stored for long periods lose its characteristics
English