All manuals and user guides at all-guides.com
General Description
The diagram of the most impor-
tant functional elements can be
found on the foldout side.
Scope of Delivery
that it is complete. Dispose of the packag-
ing material correctly.
-
Fully assembled dirty water
submersible pump
-
Quick-connect adapter
-
Angle adapter
with quick-connect connector
-
Reducer
-
8 m nylon cord
-
Instruction Manual
Functional description
The dirty water submersible pump has
a stainless steel casing, a stable suction
foot and a non-corrosive motor shaft. The
automatically switches the equipment on
or off.
The motor is protected from overload by a
thermal safety switch.
Please refer to the following descriptions
for the function of the operating parts.
Overview
1 Handle
2 Pump housing
3 8 m nylon cord
4 Mains connection cable
5 Foot part
6 Pump outlet
7 Float switch (not visible)
8 Float switch height adjustment
(not visible)
9 Quick-connect adapter
10 Angle adapter with quick-con-
nect connector
11 Reducer
12 Float switch cable
13
height adjustment
Technical Data
Dirt Water
Submersible Pump ................. FTS 1100 D4
Rated voltage .................. 230 V~, 50 Hz
Rated power input/
Power consumption ....................1100 W
Max. discharge rate (Q max) .. 20000 l/h
Max. discharge head (H max) ........... 8 m
Max. depth of immersion .................. 7 m
Max. water temperature (T max) ..... 35
Hose connection ............... 1", 1¼ ", 1½ "
Max. foreign body size ................35 mm
Switching point level:
ON ........................... approx. 520 mm
OFF ...........................approx. 230 mm
Mains cable .................................. 10 m
Weight (incl. accessories) ............5.65 kg
Safety class .......................................... I
Degree of protection ........................IPX8
The maximum performance data are
measured with a straight, direct outlet
flow. The angle piece and backflow valve
may reduce performance.
G B
I E
1 9