Electrical Safety - FLORABEST FTS 1100 D4 Traducción Del Manual De Instrucciones Original

All manuals and user guides at all-guides.com
equipment whilst it is running.
There is a risk of injury!
• Do not use the equipment in the
gases. Non-observance will re-
• Store the equipment in a dry
place and out of reach of chil-
dren.
the equipment and any pos-
sible person injury resulting
from this:
• The transportation of aggressive,
abrasive (grinding effect, e.g.
sandwater), corrosive, combus-
tible (e.g. motor fuels) or explo-
sive liquids, salt water, cleaning
agents and foodstuffs is not per-
mitted. The temperature of the
liquid being transported must not
35
can lead to device damage and
create a risk for the user.
• Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of the
manufacturer. Before initial op-
eration, have a specialist check
that the required electrical pro-
tection measures are in place.
• Monitor the equipment during
operation (particularly in resi-
dential spaces, in order to detect
automatic switching off or dry
running of the pumps in time.
Regularly check the function
"Initial Operation"). Non-obser-
vance will invalidate all guaran-
tee and liability claims.
• Please note that the pump is
not suitable for continuous op-
eration (e.g. for watercourses
equipment regularly for correct
functioning.
• Note that the lubricants used in
the equipment may cause dam-
age or contamination if they
escape. Do not use the pump in
valuable plants.
by the cable or pressure line.
• Protect the equipment from frost
and from running dry.
• Use only original accessories
and do not carry out conversion
work on the equipment.
• Please read the notes in the op-
erating instructions on the topic
Storage". Any measures above
and beyond these, particularly
opening the equipment, are to
be carried out by an electrician.
In the case of repairs, always
contact our service centre.

Electrical safety:

and injuries from electric
shocks:
• After erection, the mains plug
must be freely accessible when
the equipment is in operation.
• Before operating your new
pump, have a specialist check:
- The earthing, the protective
current circuit breaking must
be compliant with the safety
G B I E
2 1