Burda RELAX GLASS IRA IP65 Instrucciones De Montaje página 13

I
NSTRUCTION FOR ALL OTHER DIMMABLE MODELS
: Power on the unit
On/off
Plug in the device, and
Switch
then press the switch to
the position I. Point the
remote control directly to
the receiver, press the
button "ON" on the
remote control, the
device will sound 1 beep
and starts to heat in high
Stand-b y
power mode (100% the
rated power).
Heat Function Display
Timer Function Display
All three heating status
lamps will turn in red. The
unit is in heating mode
now.
Standby mode Set the time function
Press the button Press either, or both
"standby" on the of the Timer control
remote control, the buttons (picture 11),
device will sound 1 to activate the delay-
beep and revert to off timer function. (1,
Standby mode, the 2 or 3-hour options).
Stand-by lamp is 1 Hour Timer:
flashing. Point the remote
control directly to the
receiver and press the
button of "1hr". The
1st timer status lamp
will turn to green, the
device will be
switched off after 1
hour, and revert to
standby mode.
Power off the unit: 2 Hour Timer:
Press the switch to Point the remote
the position O control directly to the
receiver and press the
button of "2hr", the
2nd lamp of timer will
turn to green color,
the device will switch
off after 2 hours, and
the device will be in
standby mode, and
revert to Standby.
3 Hour Timer:
Point the remote
control directly to the
receiver and press the
button of "1hr" and
"2hr", both timer
status lamps will turn
to green color, the
device will switch off
after 3 hours, and
revert to Standby
mode.
GB