Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (12F) into the large holes in the
ENDS (A and B). Repeat this step for the SHELF (E),
CENTER SHELF (G), UPRIGHTS (K and J), SMALL
UPRIGHTS (L), and DIVIDER (M).
12F
(19 used)
www.sauder.com/services
Do not tighten the TWIST-LOCK® FASTENERS in this step.
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
B
420654
Page 5
Publicidad
