The Previous Model Ethernet (Lan) + Usb Interface Board - Citizen CT-S251 Manual De Usuario

3.6 The previous model Ethernet (LAN) + USB
Interface Board
This section provides an overview of the previous model Ethernet (LAN) interface
board. For details about this board, refer to the separate manual.
Panel button operation
Board operations are performed using the panel button on the Ethernet board. You can
use the button to print setup information.
 Printing network setup information
Press the panel button.
 Returning to factory settings
Hold down the panel button. A buzzer* will sound and then hold down the panel
button again within 3 seconds. It returns network settings to its factory settings.
* Depending on settings, the buzzer may not sound.
CAUTION
 The board will automatically restart after this operation is complete.
 If settings are configured to obtain an IP address from a DHCP server automatically, the new
IP address may be different from the previous one.
LED Functions
The tables below explain how to interpret LED indications.
Panel button
2
1
38
— —