WIRELESS 433 MHz TEMPERATURE STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this Temperature Station with wireless 433 MHz Weather Station which displays the
time, date, indoor temperature, and up to three outdoor temperature readi ngs. It is further featuring a DCF-77 radio
controlled clock with calendar display and two alarms. With
innovative product is ideal for use in the home or office.
FEATURES:
The Temperature Station
LCD Display
Function keys
•
DCF-77 Radio controlled time with manual setting option
•
24 hour display
•
Time zone option ±9 hours
LED back light
and eight easy to use function keys, this
Hanging Hole
Battery cover
Detachable stand
•
Hour and minute display, seconds indicated by flashing dot
•
Features 2 alarms with snooze function
•
Weekday with date or date with month calendar display
•
Indoor temperature reading in °C with
MIN/MAX
recordings
•
Outdoor temperature reading (for up to 3 transmitters) in °C with
•
All minimum and maximum recordings show date and time received and can be reset
•
Can take up to three outdoor transmitters
•
LED back light
•
Wall mountable or table standing
The Outdoor Temperature Transmitter
•
Remote transmission of outdoor temperature to Weather Station by 433 MHz
•
Shower proof casing
•
Wall mounting case
•
Mounting at a sheltered place. Avoid direct rain and sunshine
SETTING UP:
1.
First, insert the batteries into the Temperature Station (see "How to install and replace batteries in the
Temperature Station" below). Once the batteries are in place, all segments of the LCD will light up briefly and a
short signal tone will sound. Then the indoor temperature, the time as 0:00 and the date as 1.1. will be displayed.
If the indoor temperature is not displayed after a few seconds, remove the batteries and wait for at least 10
seconds before reinserting them. Once the indoor data is displayed proceed to step 2.
MIN/MAX
recordings