HSM SECURIO C18 Instrucciones De Servicio página 15

6 Troubleshooting
Note:
The safety element is fi tted with contact protection. The document shredder switches off if you
press the safety element during the shredding process.
Display Problem
Paper
jam
Continu-
ous lamp
Overload • The motor was overloaded. Let the shredder cool down for approx.
Flashing Safety
light element
was
pressed.
Shredded
material
container
full
Container
open
Safety
element
pressed
05/2012
All manuals and user guides at all-guides.com
Measure
You have fed in too much paper.
The cutting unit runs in reverse for a few seconds and pushes the
paper back out again.
• If necessary, press the reverse button "R" to remove the stack of paper.
• Take half the stack of paper.
• Feed the paper in portions.
15 – 20 mins. before using it again.
• Confi rm the display by pressing the reverse button "R".
• Empty the shredded material container.
Note:
If you press the reverse button briefl y before removing the container,
part of the material is pulled back into the cutting apparatus.
• Insert the shredded material container correctly in the base cabinet.
• Do not press the safety element.
SECURIO C 18
english
15