Troubleshooting Guide - BH FITNESS Aquo Program R309 Instrucciones De Uso

decide to abandon this test then
press the "Pulse/Recovery" button
and this will take you back to the
main screen. When the minute is up,
the electronic device will work out the
difference and your fi tness rating will
be displayed up on the screen: "F1,
F2,..., F5, F16; where F1 is the best
(fitness "Excellent") and F6 the worst
(fitness "Very Poor").
Pressing the "Pulse/Recovery" button
will take you back to the main screen,
where the functions will be in the
same mode as when the TEST began.
The comparison between the worked
heart rate and the recovery heart rate
provides a fast, simple method of
gauging how fit you are.
Your fitness rating is a guideline that
shows you how fast your heart
recovers after physical exertion. If you
exercise regularly then you will see
your fitness rating improve.
The test will not work if the sensor is
not connected correctly or if the error
code "P" appears on the screen.

TROUBLESHOOTING GUIDE

Problem: The display comes on but
only the Time function Works.
Solution:
a.-Make sure that the connection
cable is connected.
All manuals and user guides at all-guides.com
(6V Transformer)
Problem: The monitor does not
switch on.
Solution:
a.- Check
connection
b.- Check the output connection from
the transformer to the monitor.
c.- Check
connections.
d.- Check the cable connections for
the main post..
Avoid leaving the electronic monitor
in direct sunlight
damage the liquid crystal display.
Similarly, do not expose it to water or
knocks.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
10
the 230 V
the monitor
as this
mains
cable
might