Makita DUX60 Manual De Instrucciones página 7

Vibration
EM401MP (as a brushcutter)
EM401MP (as a string trimmer)
EM404MP (as a brushcutter)
EM404MP (as a string trimmer)
EM406MP
EN401MP
EN401MP LE400MP
EN410MP
EN410MP LE400MP
EN420MP
EY401MP
EY401MP LE400MP
KR400MP
EE400MP
EJ400MP
EJ400MP LE400MP
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Attachment
Nylon cutting head
Plastic blade
Nylon cutting head
Plastic blade
Nylon cutting head
Plastic blade
Left handle (Front grip)
Uncertainty
ah (m/s2)
K (m/s2)
3.0 1.5
5.0 1.5
1.5
2.5
3.0 1.5
3.0 1.5
1.5
2.5
2.5 1.5
4.0 1.5
5.5 1.5
5.5 1.5
4.0 1.5
4.5 1.5
6.5 1.5
2.5 1.5
5.5 1.5
1.5
2.5
1.5
2.5
4.0 1.5
4.5 1.5
7 ENGLISH
Right handle (Rear grip) Applicable
Uncertainty
ah (m/s2)
K (m/s2)
1.5
2.5
1.5
2.5
1.5
2.5
1.5
2.5
1.5
2.5
1.5
2.5
1.5
2.5
1.5
2.5
3.5 1.5
4.0 1.5
2.5 1.5
2.5 1.5
4.0 1.5
1.5
2.5
1.5
2.5
1.5
2.5
1.5
2.5
3.0 1.5
3.0 1.5
standard
EN11806
EN50636
EN50636
EN11806
EN50636
EN50636
EN50636
EN50636
ISO10517,
EN60745
ISO10517,
EN60745
ISO10517,
EN60745
ISO10517,
EN60745
ISO10517
ISO11680
ISO11680
EN709
ISO11789
ISO10517
ISO10517