Important Assembly Information - Tunturi Pure COMPACT SMITH Manual De Instrucciones

IMPORTANT ASSEMBLY INFORMATION

Tools Required for Assembling the Bench: Two Adjustable Wrenches and
Allen Wrenches.
NOTE: It is strongly recommended that this machine is assembled by two
or more people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on
components that need to be assembled. Attach washer only to end of the
Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on
components that need to be assembled.
Always wait until all bolts are assembled onto the bench before tightening the
bolts. Do not fasten each bolt right after it is installed
Fasten Nuts and Bolts
3 Tunturi Pure Strength
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivotal function.
Make sure all pivotal components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
www.tunturi-fitness.com