Outside Surfaces - Pit Boss COMPETITION Serie Manual Del Propietário

4. OUTSIDE SURFACES

• Wipe your smoker down after each use. Use warm soapy water to cut the grease. Do not use oven cleaner, abrasive
cleansers or abrasive cleaning pads on the outside smoker surfaces. All painted surfaces are not covered under
warranty, but rather are part of general maintenance and upkeep. For paint scratches, wearing, or flaking of the
finish, all painted surfaces can be touched up using high heat BBQ paint.
• Use a cover to protect your smoker for complete protection! A cover is your best protection against weather and
outside pollutants. When not in use or for longterm storage, keep the unit under a cover in a garage or shed.
ITEM
Main Cabinet Glass Door
Bottom of Main Cabinet
Burn Pot
Cooking Grids
Water Pan
Grease Tray
Grease Exhaust Tube
Auger Feed System
Electric Components
Air Intake Vent
Grill Probe
CLEANING FREQUENCY TIME TABLE (NORMAL USE)
CLEANING FREQUENCY
Every 2-3 Smoke Sessions
Every 5-6 Smoke Sessions
After Each Smoke Session
After Each Smoke Session
After Each Smoke Session
After Each Smoke Session
Every 5-6 Smoke Sessions
When Pellet Bag is Empty
Once A Year
Every 5-6 Smoke Sessions
Every 2-3 Smoke Sessions
CLEANING METHOD
Mix Baking Soda & Vinegar, Scrub with Steel Wool (Fine)
Scoop Out, Shop-Vac Excess Debris
Scoop Out, Shop-Vac Excess Debris
Burn Off Excess, Brass Wire Brush
Scrub Pad & Soapy Water
Scrub Pad & Soapy Water
Scrub Pad & Soapy Water
Allow Auger to Push Out Sawdust, Leaving Hopper Empty
Dust Out Interior, Wipe Fan Blades with Soapy Water
Dust, Scrub Pad & Soapy Water
Scrub Pad & Soapy Water
13