Sleep Function; Radio Operation - SOUNDMASTER HighLine FUR 6000 Manual Del Usuario

5. SLEEP FUNCTION

During radio on mode, press Snooze / Sleep button (6) to turn on Sleep mode, the
sleep time will keep flashing by 5 second, within 5 seconds and press sleep button
can change the duration from 90 min – 15 min. Press On/Off button (8) to cancel
sleep function.
DST – Daylight saving time
Press >> / Y-M-D / DST button (5) and hold for seconds to toggle on and off DST
function.

RADIO OPERATION

Press the On/Off button (8) to turn radio on.
-
Select AM/FM band press the AM/FM band button (11).
-
Select the station using the Tune knob (9).
-
Turn the volume knob (10) to adjust volume as required.
-
- Press the On/Off button (8) to turn radio off.
Note:
- The AM band use an internal directional aerial, rotate the radio for best reception.
Ensure that the FM antenna (13) is completely unrolled and extended for best FM
-
reception.
RESET
The reset button (18) is located on the back of unit. Use a ballpoint pen to press it
-
whenever you change the batteries, or unit is not performing as expected. This will
return all settings to default value, and you will lose any stored data (alarm and
clock settings).
PROJECTION UNIT
Focus setting: Adjust the projection clock brightness/focus by turning the
-
brightness/focus adjustment wheel (22) until the projected time is clearly shown on
the ceiling or wall.
To flip projected image by 180° flip button (23).
-
NOTE:
PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.
MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.
ENGLISH
ENG 6