Cleaning - ZUMEX ESSENTIAL Manual De Usuario

Cleaning

To clean the machine, proceed as follows:
step 1 Unplug the appliance from the mains.
step 2 Dismantle the front cover.
step 3 Dismantle the blade holder (Fig. 4) by pulling it towards you using the handle.
Warning! Handle this part very carefully, as it might cut you.
step 4 Remove the peel ejectors from their supports (Fig. 5).
step 5 Dismantle the extraction drums in pairs, after unscrewing the knobs that hold
them in place (Fig. 6).
step 6 Dismantle the juice container and filter (Fig. 7).
step 7 Disassemble the tap unit (Fig. 8)
·
All the parts, EXCEPT THE COVER can be washed in the dishwasher.
·
Cleaning the juice extraction and cover zone. This should be done using a soft cloth
dampened in water and a detergent that is suitable for washing dishes. Then rinse
with clean water to remove all traces of soap.
·
After completing the cleaning process, assemble all the elements in reverse order.
Check that the parts are properly assembled and secured.
·
Remember that each juice extractor (Fig. 5) only fits on one side, and they are not
interchangeable. When putting them in position ensure that the ejector blade enters
as far as it will go in the groove of the male extractor drum.
·
To prevent the accumulation of wax, clean the fruit feeder often (Fig. 9) in the
Zumex Versatile model.
·
In models with a podium, clean the chute and interior of the podium to remove all
traces of peel and pulp.
Directions For Use
42
All manuals and user guides at all-guides.com
English