Detecting faults and problems
PROBLEM: The machine does not work
Possible cause
Machine not plugged in.
No current reaches the socket.
Cover not in the correct position.
Juice container not in the correct position.
The drums are blocked.
Failure in the safety sensors.
ON/OFF push button not working properly.
Faulty circuit.
PROBLEM: The machine often becomes blocked during the extraction operation
Possible cause
Insufficient voltage.
Faulty circuit.
PROBLEM: The drums are not synchronised
Possible cause
Axle failure.
PROBLEM: The ejector breaks
Possible cause
Ejector not in correct position.
44
Detecting faults and problems
All manuals and user guides at all-guides.com
English
Correction
Plug into mains.
Check the socket.
Check it is in the correct position.
Check it is in the correct position.
Unplug the machine
and unblock the drums.
Contact the Technical Service.
Contact the Technical Service.
Contact the Technical Service.
Correction
Check that the voltage is the one
indicated in the manual.
Contact the Technical Service.
Correction
Contact the Technical Service.
Correction
Put in position in accordance with the
instructions in the manual.