Controls Icons - Textron JACOBSEN PGM Serie Manual Tecnico

5 CONTROLS
5 CONTROLS
5.1 ICONS ___________________________________________________________________
Operator Presence Control
Unlock
Lock
Never attempt to operate the machine unless you have read the Safety and Operation
Manual, the Parts and Maintenance Manual, the engine manual and know how to operate
all controls correctly.
Familiarize yourself with the icons shown above and what they represent. Learn the
location and purpose of all the controls before operating this mower.
5.2 CONTROLS ______________________________________________________________
A. Parking Brake – Used whenever the mower is left
unattended or as a service brake while transporting.
B. Paddle Throttle – Controls the speed of the engine
when OPC Bail is engaged. Push (+) side of lever to
increase engine speed. Push (-) side of lever to
decrease engine speed.
C. O.P.C. Bail – Engaging bail increases engine speed
which engages the centrifugal clutch. Release bail
to return engine to idle. The bail must be
disengaged to start the engine.
D. Engine Switch – The engine switch enables and
disables the ignition system. The engine switch
must be in the ON position for the engine to run.
Turning the engine switch to the OFF position stops
the engine.
10
All manuals and user guides at all-guides.com
Engine
Engine Off
Parking Brake
Engaged Disengaged
!
WARNING
Engine Run
C
H
P
A
N
A
D
D
Throttle
Fast Slow
Fuel
Choke
Gasoline
B
B
C
Figure 5A
Figure 5B