Safety Notes; Important Notes; Functions - Minitrix IC 2013 Manual Del Usuario

Safety Notes

• Analog 14 volts DC, digital 19 volts AC.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
• The wire used for feeder connections to the track may be a
maximum of 2 meters / 78 inches long.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions and the packaging are a compo-
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or spare
parts.
• The warranty card included with this product specifies the
warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
• The LEDs in this item correspond to Laser Class 1 according
to Standard EN 60825-1.
• The coupling drawbars included with the models can be used
for a prototypical car spacing.
General Note to Avoid Electromagnetic Interference: A
permanent, flawless wheel-rail contact is required in order to
guarantee operation for which a model is designed. Do not make
any changes to current-conducting parts.

Functions

• Car with 14-pin digital interface
See page 18.
• Interior lighting 66611 can be installed.
Can be controlled digitally with the built-in decoder
(see page 17).
• Built-in headlights / marker lights.
Can be controlled digitally with the built-in decoder.
7