The Different Components And How They Work; Armband: Arm Module With Flexible Strap - Livassured NightWatch Manual De Instrucciones

All manuals and user guides at all-guides.com

4. The different components and how they work

4.1 Armband: arm module with flexible strap

The arm module is the device that is placed around the upper arm. The best position for the
arm module is facing forward around the upper arm between the biceps and the shoulder.
The two green lights on the dark grey underside of the arm module are used for registering
the heartbeat. The arm module also registers movement. It allows the arm module to detect
an epileptic seizure and send a signal to the base station. The arm module is powered by a
rechargeable battery.
EN
The dark grey underside of the arm module has an on/off switch. The position can be
changed using a pen, which should be done once at first use to switch on the arm module.
The green heartbeat lights will light up. Then connect the armband to the charging adapter
so that the system stops registering. As soon as you remove the armband from the charging
adapter, the system will automatically start registering. This is how you start and stop the
system from now on. Always keep the armband connected to the system when not using the
system.
The arm module can only charge when turned on via the on/off switch. The arm module will
not charge if the on-off switch is turned off. When it is not possible to connect the armband
to the charging adapter, for example during transport, the on-off switch can be used to turn
off the arm module to prevent the battery from running out.
PLEASE NOTE: The arm module cannot charge when turned off at the switch.
The white upper side of the arm module contains one red light and one green light, used for
several signals.
V3.0 58