How To Prepare Your Nightwatch For First Use; Step 1: Adjust The Armband - Livassured NightWatch Manual De Instrucciones

5. How to prepare your NightWatch for first use

5.1 Step 1: Adjust the armband

You will need:
Flexible strap
§
2 clips
§
Arm module
§
Ballpoint pen/pencil
§
Sharp (fabric) scissors
§
The armband, consisting of the flexible strap and the arm module, should be adjusted to fit
the wearer. The armband must not be too tight, but should fit snugly against the skin.
Use the flexible strap to measure the circumference of the wearer's arm above the biceps in
a bent position. Do not stretch the band. Mark the flexible band at the overlap.
EN
Cut the flexible strap at the marked point.
Attach the two clips to the band as shown below.
Tip: push one corner of the flexible band through the clip and then pull the entire band
through the clip until it sticks out at a length of one centimetre.
V3.0
All manuals and user guides at all-guides.com
60