Slave Mode - Cameo STUDIO PAR 64 CAN Manual De Usuario

All manuals and user guides at all-guides.com
MODE SELECTION:
SOUND CONTROL MODE
Press the mode button to select Sound Control Mode. The unit will then
run via the built in microphone. Press Enter ( 2. digit blinks ) to select
RGB or 7 Colour by using UP and DOWN buttons. Press ENTER ( first 3.
and then 4. digit blinks ) again to adjust jumping speed ( 00-99 ) by using
UP and DOWN buttons.
RGB
00 - 99 sound sensitivity adjustable.
7COLOUR
00 - 99 sound sensitivity adjustable.

SLAVE MODE

Press the MODE button to enter SLAVE MODE.
Link the slave unit and the master unit via DMX cable. The slave unit
will follow in sequence with the master unit.
DMX ADDRESS SETTING MODE
Press the MODE button to enter DMX ADDRESS SETTING MODE.
Press ENTER to access edit mode (the last 3 figures will blink). Use the
UP and DOWN buttons to set the DMX address (A001 - A512).
Press ENTER to confirm.
11