Manufacturer's Warranty - STEINEL DL Vario Quattro PRO S Manual Del Usuario

Detection diagram (Fig� 6�5)
The shaded zones show the areas that can be masked
out by customising the reach setting. (Fig� 6�6)
Detection reach table
Mounting height 2.5 m
Adjustment
radial
1 2.4 m x 2.4 m
2 3.2 m x 3.2 m
3 3.6 m x 3.6 m
4 4 m x 4 m
4.4 m x 4.4 m
5
6 5 m x 5 m
7 6 m x 6 m
6 m x 6 m
8
Mounting height 2.8 m
Adjustment
radial
1 3 m x 3 m
2 3.4 m x 3.4 m
3 3.8 m x 3.8 m
4 4.4 m x 4.4 m
5 5.4 m x 5.4 m
6 5.6 m x 5.6 m
7 6 m x 6 m
8 6 m x 6 m
Mounting height 3.0 m
Adjustment
radial
1 3.4 m x 3.4 m
3.6 m x 3.6 m
2
3 4 m x 4 m
4 4.8 m x 4.8 m
6 m x 6 m
5
6 6 m x 6 m
7 6 m x 6 m
6 m x 6 m
8
Mounting height 6.0 m
Adjustment
radial
1 5.7 m x 5.7 m
6 m x 6 m
2
3 6.7 m x 6.7 m
4 8 m x 8 m
5 10 m x 10 m
6 10 m x 10 m
7 10 m x 10 m
8 10 m x 10 m
7. Maintenance
The light can be cleaned with a damp cloth (without
detergents) if dirty.
tangential
4 m x 4 m
6 m x 6 m
7.3 m x 7.3 m
8.6 m x 8.6 m
10.2 m x 10.2 m
12.6 m x 12.6 m
15.7 m x 15.7 m
16 m x 16 m
tangential
5.4 m x 5.4 m
6.4 m x 6.4 m
7.5 m x 7.5 m
8.8 m x 8.8 m
10.4 m x 10.4 m
13.1 m x 13.1 m
17 m x 17 m
17.3 m x 17.3 m
tangential
6.2 m x 6.2 m
6.6 m x 6.6 m
7.7 m x 7.7 m
9 m x 9 m
10.6 m x 10.6 m
13.4 m x 13.4 m
17.9 m x 17.9 m
18.1 m x 18.1 m
tangential
11 m x 11 m
11.7 m x 11.7 m
13.6 m x 13.6 m
16 m x 16 m
18.7 m x 18.7 m
23.8 m x 23.8 m
31.7 m x 31.7 m
32 m x 32 m
- 14 -
Important note: the control gear cannot be
replaced.
8. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environmen-
tally compatible manner.
Do not dispose of electrical and electronic
equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste
Electrical and Electronic Equipment and its imple-
mentation in national law, electrical and electronic
equipment no longer suitable for use must be
collected separately and recycled in an environ-
mentally compatible manner.

9. Manufacturer's warranty

As purchaser, you are entitled to your statutory
rights against the vendor. If these rights exist in your
country, they are neither curtailed nor restricted by
our Warranty Declaration. We guarantee that your
STEINEL Professional sensor product will remain
in perfect condition and proper working order for
a period of 5 years. We guarantee that this product
is free from material-, manufacturing- and design
flaws. In addition, we guarantee that all electronic
components and cables function in the proper
manner and that all materials used and their
surfaces are without defects.
Making Claims
If you wish to make a claim, please send your prod-
uct complete and carriage paid with the original
receipt of purchase, which must show the date of
purchase and product designation, either to your
retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate,
Peterborough, PE2 6UP, for a returns number.
For this reason, we recommend that you keep your
receipt of purchase in a safe place until the warranty
period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under
the terms of the warranty, please go to
www.steinel-professional.de/garantie