Registering A Tv Or Monitor - Sony STR-DE905G Manual De Instrucciones

Registering a TV or Monitor

Registering a Sony TV or monitor
If your Sony TV can be controlled by an infrared
remote, and it is connected to the receiver by it's
VIDEO 1 video input jack, IR code registration is
unnecessary.
The following cases require registration of a Sony TV
• If your Sony TV is connected via a different video
input jack (such as VIDEO 2).
To ensure proper operation, follow steps 1 to 3 below,
click VIDEO 1 2 3 to specify the correct video input in step
4, then click RETURN or EXIT.
• If you are using a wide Sony TV (except for
customers in Australia, Malaysia, and Singapore).
To ensure proper operation, follow steps 1 to 3, click
WIDE in step 4, then click RETURN or EXIT.
Registering a non-Sony TV or monitor
Complete the following procedure to set the receiver to
turn on your TV or monitor automatically whenever
you turn on the receiver.
Registration
1
Turn on the receiver and the TV set.
Make sure the input selector on the TV set is set to
the video input.
2
Click FUNCTION in the main menu.
FUNCTION
S
O
U
N
D
LIST
BAND FM 102.50MHz
3
Click TV SET.
FUNCTION SELECT
VIDEO 1
VIDEO 2
VIDEO 3
L D
TV / DBS
MACRO 1
TV SET
ALL
OFF
VOL
+
–
SUB USER
– +
STEREO
DAT/MD
CD
TUNER
PHONO
TAPE
MACRO 2
EXIT
Preparing and Using the Remote
4
Click OTHER TV (or click "Sony TV" for a Sony
TV).
Australian, Malaysian, and Singaporean models
TV MONITOR SET
TV IR SET
TV INPUT
GRAPHIC POSITION
RETURN
Other models
TV MONITOR SET
TV IR SET
TV INPUT
TV SIZE
GRAPHIC POSITION
RETURN
If you connected the receiver to the VIDEO 2, or 3
jacks on your TV or monitor
Click VIDEO 1 2 3 to specify the correct video input.
If you are using a wide TV
Click WIDE to specify WIDE.
(This operation is unnecessary for customers in
Australia, Malaysia, and Singapore.)
If you are using a Sony TV
The IR codes are programed automatically and
registration is complete (click RETURN or EXIT).
Before going to step 5, cover the IR sensor on the
TV to prevent accidental operation. Otherwise,
the on-screen display may be turned off during
the programing procedure.
5
Click START.
TV MONITOR SET
TV IR SET
TV INPUT
GRAPHIC POSITION
RETURN
Sony TV
OTHER TV
VIDEO 1 2 3
EXIT
Sony TV
OTHER TV
VIDEO 1 2 3
NORMAL WIDE
EXIT
Sony TV
OTHER TV
START
VIDEO 1 2 3
EXIT
(continued)
17 EN