6
Click LIST to display the memory list.
LIST
BAND
FM 102.50MHz
7
Click A B C repeatedly to select the page (A, B, or
C) where you want to store the station.
FM 96.00MHz
9
FM 95.50MHz
0
A
B
C
MEMORY
BAND
FM 102.50MHz
8
Click MEMORY.
MEMORY turns red.
FM 96.00MHz
9
FM 95.50MHz
0
A
B
C
MEMORY
BAND
FM 102.50MHz
9
Click the button (0 to 9) where you want to store
the station.
The button lights up and the station is stored.
1
FM 102.50MHz
2
FM 92.00MHz
3
FM 94.50MHz
4
FM 92.00MHz
FM 89.50MHz
5
FM 89.50MHz
6
FM 104.50MHz
7
FM 101.00MHz
8
FM 96.00MHz
9
FM 95.50MHz
0
A
B
C
MEMORY
BAND
FM 102.50MHz
10
Repeat steps 4 through 10 to preset up to 30
stations.
During automatic tuning
When you tune past either end of the band, the
receiver automatically jumps to the opposite end and
continues scanning in the same direction. Every time a
station is received, the receiver stops scanning. To
continue scanning, press the icon again.
To change a preset station
Preset a new station at the number you want to change.
Note
If the AC power cord is disconnected for about one week,
the preset stations will be cleared from the receiver's
memory, and you will have to preset the stations again.
To watch FM simulcast TV programs
Make sure that you tune in the simulcast program on
both the TV (or VCR) and the receiver.
SUB
USER
–
+
STEREO
EXIT
–
+
STEREO
EXIT
–
+
STEREO
ALL
OFF
VOL
+
–
EXIT
–
+
STEREO
Basic Operations
Tuning preset stations (preset tuning)
1
Click FUNCTION in the main menu.
2
Click TUNER .
3
Click LIST.
4
Click A B C repeatedly to display the station you
want.
5
Click the button (0 to 9) for the respective station.
To recall preset stations from the SUB menu
1 Click SUB.
2 Click A B C repeatedly to select the memory page.
3 Click the number of the station you want.
Tuning preset stations using the controls
on the front panel
1
Press POWER to turn on the receiver.
2
Press TUNER to select "TUNER".
The last received station is tuned in.
3
Press PRESET TUNING +/– to tune in the preset
station you desire.
27
EN