Alarm Mode; Alarm Mode Functions; To Set An Alarm In Alarm Mode - Timex W-188 Guia Del Usuario

589-095006_W188_NA_EN_589-095006_W188_NA_EN 3/11/11 8:39 AM Page 58

Alarm Mode

INDIGLO®
night-light
To Configure
Mode or hold for
time
Turn alarm
ON or OFF

Alarm Mode functions

You can use your Watch as an alarm clock for up to five separate
10_M589_alarm
alarms. When you set an alarm, the alarm clock icon appears in
Time of Day Mode. The alarm can alert you at the same time every
day, or only weekdays, weekends, or even only one time (useful for
appointment reminders).
When the Watch reaches a scheduled alarm, the alarm tone sounds
and the INDIGLO night light flashes for a period of 20 seconds.
You can silence the alarm during this period by pressing any
button on the Watch, or, if you do not silence the alarm before the
alert finishes, a backup alarm will sound after five minutes.
58
All manuals and user guides at all-guides.com
L
alarm
Set alarm
M
alarm

TO SET AN ALARM IN ALARM MODE

For instructions on setting Watch functions, including Alarm
Mode, refer to page 13, "To set Watch functions."
For Alarm Mode, you can set the following values:
O Alarm number (ALM 1 through ALM 5).
O Alarm status (OFF or ON).
You can also press START/SPLIT to switch the alarm status.
O
Alarm type (WEEKDAYS, WEEKENDS, ONCE, or DAILY).
A DAILY alarm will ring every day at the selected time, a
WEEKDAYS alarm will ring Monday through Friday at the
selected time, a WEEKENDS alarm will ring Saturday and
Sunday at the selected time, and a ONCE alarm will only ring
one time at the selected time and then automatically turn off.
O
Alarm time (hours, minutes and AM/PM if the time is set to 12-
hour format).
NOTE: If you change any alarm settings, you automatically arm
the alarm.
59